Power Quality evaluation procedure:
The Procedure for Evaluation of Power Quality Issues are:
1. Identify Problem Category
First, we have to identify that on which category the Problem falls, like Voltage Regulation unbalance, Voltage sag Interruption, Flicker Harmonic, Transient distortion.
2. Problem Characterization
In this Step, we have to do Measurements and Data collections i.e., causes, characteristics, Equipment impact, etc so that we can have a better knowledge over the problem.
3. Identify range of solutions
It this Step, we have to identify which part of system is affected Utility transmission system, Utility distribution system, End user consumer interface, and how to cure the problem.
4. Evaluate solution
In this Step, we analyze the method of solution through Modeling Analysis procedures and Evaluation Technical Alternative.
5. Optimism Solution
At the final step, we have to Evaluate economics of possible solution so that the solution would be budget friendly.
Categories and Characteristics of Power System electromagnetic Phenomena
Page No. 02